13
Chapter 1 Before Operation
Copyright © 2018 Duplo Corporation All Rights Reserved
Item
Setting range
Default value
Details
IntervalTime
[3]
[5]
[10]
[15]
[20]
[30]
[5]
After processing the batch sheet number set in [Interv Sht],
set the interruption time (seconds) until the start of the
next paper feed.
Interv Sht
(Interval No. of
Sheets)
1 to 999 (Sheet)
1
Set a number of sheets for batch print for the folding
operation.
Power Save
(Power Save
Setting)
[ON]
[OFF]
[ON]
Set whether the backlight of LCD display turns off
automatically. (Energy-saving mode)
P-Save Time
(Power Save Time)
1 to 99 (Minutes)
5
Set the time when the backlight of LCD display turns off
automatically.
Load Detect
[ON]
[OFF]
[ON]
Set the paper loading detection.
Tone
[ON]
[OFF]
[ON]
Set whether or not the buzzer (key operation sound on the
operation panel) shall be enabled.
However, the buzzer will go off in case of abnormality even
when the setting is [OFF].
DEF Speed
(Default Process
Speed)
Processing speed.
If [DEF INTVL] is set to [ON], [DEF Speed] can be read when
the power is turned on. However, this is only when [Oper
Mode] is set to [STD].
,
, and
can be used only with standard
folding of standard size paper.
Processing speed is lower as numbers become smaller, and
higher as numbers become larger.
DEF INTVL
(Default Interval)
[ON]
[OFF]
[OFF]
If set to [ON], the [Interval] can be read when the power is
switched on. However, this is only when [Oper Mode] is set
to [STD].
Feed Time
[Mid] (Middle)
[Long]
[Mid]
Set the timing for paper feed.
Feed INTVL
(Feed Interval)
[ON]
[OFF]
[OFF]
If set to [ON], the processing speed and [DEF Speed] can all
be selected.