Duplo DF-520, Instruction Manual

Page: 13 / 72

13
No. Name Function
Start/stop button
Test button
Number of sheets/
paper length
switch button
Clear button
Keypad
(0 to 9)
Folding mode
selection button
Speed controller
First folding
stopper adjusting
button
Second folding
stopper adjusting
button
1
2
3
4
5
6
7
8
9
Starts/stops folding.
Each time this button is pressed, start/stop is repeated alternately.
Each time this button is pressed, the unit folds two sheets of paper and stops.
Sets the number of sheets to be folded and switches the input of the paper length.
The paper length input is memorized when it is set.
Press this button to change the number of sheets to be folded and the paper length.
Press these buttons to set the number of sheets to be folded and the paper length.
There are 6 types of fixed folding methods and 2 types of special folding methods
available.
When the power is turned on, the display lamp of the single fold mode will light up.
Each time the button on the right is pressed, the folding mode lamp display switches to
the right.
When the left button is pressed, it switches to the left.
The special folding mode cannot be selected if no special folding method has been
registered.
The processing speed can be changed freely within the range of 45 to 120 sheets/min.
The processing speed increases as the knob is slid to the right and decreases as it is slid
to the left.
When the right button (+) is pressed, the folding stopper moves to the right.
When the left button (–) is pressed, the folding stopper moves to the left.
The stopper moves slightly each time the button is pressed, and continues moving
when pressed continuously until it is released.
When the right button (+) is pressed, the folding stopper moves to the right.
When the left button (–) is pressed, the folding stopper moves to the left.
The stopper moves slightly each time the button is pressed, and continues moving
when pressed continuously until it is released.
1 –1 2 3 4 5 6
0
1
2
1 2
1 2 3 4 5
6 7 8 9 0 C
1
12 13 14 15
1 2 3 4 5 6 7 8 9 10
11
5. NAMES AND FUNCTIONS OF THE
CONTROL PANEL PARTS PANEL PARTS