34
7. OPERATION PROCEDURES
7-5. CALLING THE REGISTRATION
• When folding is to be carried out using the data
that was registered during the special folding
process, press the “folding mode selection” button
and select the registered special folding mode,
1 or 2.
• If no registrations had been made previously, the
special folding mode cannot be selected.
• The special folding mode cannot be selected even
if “special folding” registration button 1 or 2 is
pressed.
• In “special folding” registration, the positions of
the folding stopper (folding plate 1 or 2) and the
stacker rolls can be memorized.
7-6. SWITCHING THE MODE USED
1
Switching from fixed to non-fixed
paper
óPress the “Number of sheets/paper length” button
and switch to the mode for non-fixed paper (length
input mode).
• If measurements had been registered previously,
these will be displayed on the display window.
Summary of Contents for DF-520
Page 72: ...72 96V 92013...
