Duplex Jet Vac Compact, Instruction Manual

Page: 20 / 32

JET VAC
COMPACT
7.1. OPERATING OF JET VAC COMPACT WITH KIT RADAMES
Attention!!
It is recommended to switch the steam generator off before connecting the steam hose to the
steam outlet.
Insert the vacuum hose (75) into the vacuum hose outlet (6) and the steam plug (34) into the steam
outlet (27) on the machine. Push until the latches (5 and 34A) lock into place.
Activate the general power switch (8), the “Power / Stand-by” switch (10) and the “Boiler” switch (12) for
the production of steam and wait approx. 4 minutes until the indicator (14) lights up indicating the
presence of steam inside the boiler.
The switches (36, 37 and 37A) on the handle have to be switched off (in OFF position).
Activate the switches (36 and 37) on the handgrip to regulate the steam flow as follows: switch (36):
minimum steam, switch (37): medium switch, switches (36 and 37): maximum steam. Use the steam
command switch (36A) to activate steam flow.
The vacuum switch (37A) activates the vacuum cleaner and can be used simultaneously with steam.
The switch (35) enables you to inject detergent with the steam by activating it for a few seconds at a time
to avoid excess liquid with the steam; to spray hot water (for models with the function of hot water
injection) please refer to what above indicated activating the switch (35A).
Both detergent and hot water injection functions have to be activated at intermittence (for ex. 20 seconds
ON - 20 seconds OFF); both functions have not to be used in continuous duty.
Detergent injection or hot water injection (optional) is possible only if at least one steam command switch
is activated and if “Steam Ready” indicator (14) is on.
Attention!!
Using the switch (35A) you will get hot water under pressure which, according to the model of the
machine, can reach a temperature of 180°C; please pay attention that the switch has not to be
pressed accidentally and that the jet has not to be directed toward people or animals.
To clean with the combination of steam, injection of detergent or of hot water and vacuum suction, choose
the accessory best suited for the job:
The multi-purpose floor tool (77): with appropriate inserts (79 and 80). Inserts are locked into place by
sliding the latches (78) toward the internal side (OPEN position), pressing them upwards, then sliding the
latches toward the external side (BLOCK position). Remember that the command switches on the handle
(36-37-37A) must be in OFF position until the end of this procedure.
Steam/vac lance (76): to be used by itself, or with the small round brushes (43-46, 49), or with steam
plunger (47), or with steam scraper (48) according to the cleaning job to be executed.
If necessary, attach the extension tubes (39) and lock them into place using the clamping units (38) in
BLOCK position. Only one tube may be used if desired.
17 JVC 44/15