Duplex Jet Vac Compact, Instruction Manual

Page: 21 / 32

JET VAC
COMPACT
Once the cleaning is finished it is recommended to vacuum approx. 3-5 litres of clean water to rinse the
inside of the hose (33) and the suction conduits. Wash and dry all accessories used. Remove the vacuum
drum (4) and, after emptying and rinsing it, let it dry before storing it away.
7.2. OPERATING OF JET VAC COMPACT WITH KIT JULY
Attention!!
It is recommended to switch the steam generator off before connecting the steam hose to the
steam outlet.
Insert the steam plug (34) into the steam outlet (27) on the machine. Push until the latches (34A) lock into
place.
Activate the general power switc
h (8), the “Power / Stand-by” switch (10) and the “Boiler” switch (12) for
the production of steam and wait approx. 4 minutes until the indicator (14) lights up indicating the
presence of steam inside the boiler.
The switches (36, 37) on the handle have to be switched off (in OFF position).
Activate the switches (36 and 37) on the handgrip to regulate the steam flow as follows: switch (36):
minimum steam, switch (37): medium switch, switches (36 and 37): maximum steam. Use the steam
command switch (36A) to activate steam flow.
The switch (35) enables you to inject detergent with the steam by activating it for a few seconds at a time
to avoid excess liquid with the steam; to spray hot water (for models with the function of hot water
injection) please refer to what above indicated activating the switch (35A).
Both detergent and hot water injection functions have to be activated at intermittence (for ex. 20 seconds
ON - 20 seconds OFF); both functions have not to be used in continuous duty.
Detergent injection or hot water injection (optional) is possible only if at least one steam command switch
is activated and if “Steam Ready” indicator (14) is on.
Attention!!
Using the switch (35A) you will get hot water under pressure which, according to the model of the
machine, can reach a temperature of 180°C; please pay attention that the switch has not to be
pressed accidentally and that the jet has not to be directed toward people or animals.
Insert the steam lance (71) directly onto the hose (33) or on extension tubes (39) by sliding the latch (38)
to the OPEN position, lock into place and then slide the latch into the BLOCK position.
Follow the same procedure in attaching the rectangular brush (72) or the triangular brush (74) which
can be covered with an absorbing cloth by using the gripper to hold the cloth in place. This is a
recommended use to clean delicate surfaces (such us precious wood f. e.) or vertical surfaces (tiles
f.e.). In this case the cloth is acting as dirt “extractor”.
18 JVC 44/15