Duplex Jet Steam Professional, User Manual

Page: 10 / 20

DUPLEX JSP
IN THE BATHROOM
For all areas difficult to reach, we suggest applying to the steam hose hand grip (9) the steam lance (20) and a small brush (22). This accessory
allows cleaning radiator crevices and all difficult points. In case of washbasin clogging, attach the steam plunger (26) to the steam lance (20)
and direct the steam into the drain.
WARNING
BY USING THE SMALL BRUSHES ON PORCELAIN EXERT THE LEAST POSSIBLE PRESSURE BECAUSE
YOU MIGHT SCRATCH THE SURFACE.
WINDOW CLEANER
(On glass or plastic surfaces)
We suggest using the window cleaner (19) by inserting it directly on the steam hose handgrip (9) and applying steam several times on the
surface. Then use the squeegee blade provided on the window cleaner to remove the dirt and water using vertical movements bringing the
dirty water to the base of the surface. Use a dry cloth to dry the base of the surface.
TRIANGULAR BRUSH
Adapted for the cleaning of armchairs, sofas, and mattresses we suggest to use the triangular brush with a cloth fastened with the special
clamp.
RECTANGULAR BRUSH
(For tiled floors)
To carry out specific grout cleaning we suggest that you use the steam lance (20) with a small brush (22 or 23 according to the need). This
way it will be possible to dislodge the most difficult dirt and remove it from the grouts using the applied pressure. To remove the dirt from
the floor use the rectangular brush (17) wrapped in a cloth, which will work as an “extractor” when fastened with the special clamps. We
suggest applying steam also while picking up the dirty water. To get a good result, work with surface areas not larger than 5 m
2
at one time
thus preventing dirt from drying and adhering on the floor again. We suggest that you use the brush (17) without the cloth when the dirt to
be dislodged is considerable; and when the dirt is not considerable, it is enough to work with the brush (17) wrapped in a cloth.
When confronted with solid objects while cleaning the floor (i.e. chewing-gum) use the special scraper (27) which can be attached to the
steam lance (20) and is able to remove stubborn objects without scratching the work surface.
To remove wax from the floor use a cloth fastened to the rectangular brush (17). The steam helps loosen the wax so that its removal will be
easier. To spread the wax on the floor use as mentioned above with a clean cloth fastened on the brush. Put the wax on the cloth, the heat
of the steam will help spread the wax evenly so that its penetration will be easier in also this case. When the wax is dry proceed with normal
buffing methods. Only the power of steam is able to replace all types of chemical product.
9 DUPLEX UK