Duplex Jet Steam Professional, User Manual

Page: 11 / 20

DUPLEX JSP
WARNING
THE GENERATOR PRODUCES STEAM WITH A TEMPERATURE OVER 100°C. BEFORE STARTING THE
CLEANING TASK WE SUGGEST TO TRY ON A SMALL AREA TO AVOID DAMAGES.
ON MARBLE AND PARQUET FLOORS
We suggest adding a cotton cloth (32) wrapped on the brush (17) to avoid scratching the surface. To continue the cleaning it is necessary
to change the cloth according to the quantity of dirt to be collected on the floor.
WARNING
THE STEAM SHOULD NOT BE IN DIRECT CONTACT WITH THE FLOOR FOR AN EXTENDED PERIOD OF
TIME! SUCH SURFACES MAY BE DAMAGED IN CASE OF COMBINED USE OF EXCESSIVE HEAT,
HUMIDITY AND BRISTLES. THEREFORE CARRY OUT THE TASK IN THE SHORTEST POSSIBLE TIME.
ON CARPETED FLOORS
Before carrying out the cleaning task we suggest that you clean the carpeted area with a vacuum cleaner. Then use the rectangular (17) or
triangular brush (18) with a cloth. Also in this case, do not forget that the cloth works as an "extractor". Therefore it should be replaced if the
quantity of dirt is considerable.
CAR INTERIORS
To clean car interiors (upholstery, carpets and seats) follow the cleaning instructions as for the carpeted floors. To clean a dashboard it is
enough to steam the surface and wipe off with a dry cloth.
Steam Iron
Mod. Tulipano:
To iron with steam the iron thermostat (30A) should be positioned on “Lana” (wool) or between the symbol “••” (wool) and the symbol “•••”
cotton. Wait few minutes so as to allow the iron to reach its ideal temperature. The steam flow from the iron is obtained by activating at short
intervals the red switch located on the handgrip of the iron.
For dry ironing do not press the red botton (30B). In this case position the thermostat according to the type of cloth being ironed.
Mod. Dublo:
To iron with steam the iron thermostat (30A) should be positioned on “Lana” (wool) or between the symbol “••” (wool) and the symbol “•••”
cotton. Wait few minutes so as to allow the iron to reach its ideal temperature and once ready, the signal on the iron will switch on. The red
button on the hose (30B) can be now pressed to allow the steam exit.
For dry ironing do not press the red button (30B). In this case position the thermostat according to the type of cloth being ironed.
To remove the shine from clothes, brighten up wool tissue, curtains etc…. use the iron vertically, directing the steam flow onto the object.
10 DUPLEX UK