DTSL3/FR MKII USER’S MANUAL
10
Chapter
Chapter
Chapter
Chapter 3
3
3
3 SAFETY
SAFETY
SAFETY
SAFETY
Read this chapter carefully and completely since important information for the safety of the operator or others in case of improper
use of the lift is included.
In the following text there are clear explanations regarding certain situations of risk or danger that may arise during the operation or
maintenance of the lift, the safety device installed and the correct use of such systems, residual risks and operative procedures to use
(general specific precautions to eliminate potential hazards).
Lifts are designed and built to lift vehicles and hold them in the elevated position in an enclosed workshop. All other uses of the lifts
are unauthorised. In particular, the lifts are not suitable for:
-Washing spray work;
-Creating raised platforms for personnel or lifting personnel;
-Use as a press for crushing purposes;
-Use as elevator;
-Use as a lift jack for lifting vehicle bodies or changing wheels.
The manufacturer is not liable for any injury to persons or damage to vehicles and other property caused by the incorrect and
unauthorised use of the lifts.
During lifting and descent, the operator must remain in the control station as the diagrams illustrated.
As the diagrams illustrated, the presence of persons inside the danger zone indicated is strictly prohibited. During operations persons
are admitted to the area beneath the vehicle only when the vehicle is already in the elevated position, when the platforms are
stationary, and when the mechanical safety devices are firmly engaged.
DO NOT USE THE LIFT WITHOUT PROTECTION DEVICES OR WITH THE PROTECTION DEVICES INHIBITED.
FAILURE TO COMPLY WITH THESE REGULATIONS CAN CAUSE SERIOUS INJURY TO PERSONS, AND IRREPARABLE
DAMAGE TO THE LIFT AND THE VEHICLE BEING LIFTED.
Picture 5
