ph: 519-923-9813 | [email protected]| web: www.dundalkleisurecraft.com
Fig 2a
Fig 2b
Line up the handles with the longer handle on the
outside and thread the lag connector bolts from the
inside to the outer handle.
(Hand tighten only at this point)
To install the door handles, locate the 2 handles and 2
of the 2 ¾” (70mm) Connector Bolts .
Once you ensure the magnetic catch on the handle and
the door frame line up correctly, you can tigthen
completely.
Indoor Pure Cube Sauna
Assembly Instructions
10
Install the trim pieces over each seam.
You can use a staple gun or 1 ½” (38mm) screws.
(If using screws, you may want to pre drill your holes to
prevent the trim pieces from splitting)
