Duke X-STREAM WASH, Installation And Operation Manual

Page: 8 / 36

Installation and Operation of X-STREAM WASH
8
IV. OPERATION INSTRUCTIONS
A. INITIAL STARTUP
A-10 Fill Tanks with Water
• WASH TANK – Fill wash tank with hot water to the
marked Fill Line. The water temperature should be
110˚ to 115˚ F (43˚ to 46˚ C).
Fill Line
• RINSE TANK – If equipped, fill the rinse tank
with hot water to the marked Fill Line. The water
temperature should 75˚ to 80˚ F (24˚ to 27˚ C).
• SANITIZE TANK – If equipped, fill the sanitize
tank with hot water to the marked Fill Line. The
water temperature should 75˚ to 80˚ F (24˚ to
27˚ C).
: Do not connect to hot-water
supply exceeding a temperature of 115°F (46°C).
A-20 Add Soap / Chemicals
• WASH TANK – If your unit is equipped with the
soap injection option, then make sure that the
soap pump pick up tube is inserted into the soap
container. The soap will automatically be injected
into the wash tank. Otherwise, manually add the
soap into the wash tank in accordance with the
chemical supplier's instructions.
Soap Pump Installation
• SANITIZE TANK – If equipped, add the appropriate
sanitizing chemical to the sanitize tank. Consult
chemical supplier and your local health code.
A-30 Approved Chemicals
It is recommended that chemicals that are low to non
foaming, metal safe, and non-caustic be used in the
wash and sanitize tank.
Caustic chemicals are capable of burning, corroding,
or destroying living tissue and should not be used. If
you plan on using caustic chemicals, then a rolling lid is
required. If your unit did not come with a rolling lid, one
can be ordered from the factory. Contact information is
provided on the inside cover of this manual.
: Chemicals used in the wash
tank that do not have de-foaming capabilities
will not run properly and could damage the
machine. Consult your chemical supplier
before use.
: Chemical Hazard - could result
in serious injury or death. Always consult with
your chemical supplier and read all warning
labels before handling new chemicals.