![Duke X-STREAM WASH Installation And Operation Manual Download Page 13](http://html1.mh-extra.com/html/duke/x-stream-wash/x-stream-wash_installation-and-operation-manual_2539208013.webp)
13
Installation and Operation of X-STREAM WASH
Programming – Controls Supplied After
12/01/2013
The programming mode can be accessed by holding the
TEMP
and
START
STOP
buttons simultaneously for 5 seconds. The
display will switch back and forth between SP and 115.
The following parameters can be set in the
programming mode:
Parameter Description
Default Value
SP
Set Point
Temperature
Default
Temperature is
115°F
t1
Change Water
Cycle Time
Default Cycle
Time is 4:00
(H:MN)
t2
Soap
Dispensing
Delay Time
Default Delay
Time is 0:45
(M:SC)
t3
Soap
Dispensing Time
Default
Dispensing
Time is 1:30
(M:SC)
F/C
Celsius/
Fahrenheit
Selection
Default
Temperature
Units is
Fahrenheit (F)
The
and
buttons are used to increment and
decrement parameters.
The
TEMP
button is used to scroll through the
parameters.
Pressing the
TEMP
button after the last parameter
saves the parameters and exits programming.
Programming – Controls Supplied Prior To
12/01/2013
Supervisor Mode
The supervisor mode can be accessed by holding the
TEMP
and
START/STOP
buttons simultaneously for 3
seconds. The display will toggle OPr and OP.b.
Pressing the
Up
or
Down
buttons will toggle between
OP.b, OP.5, CPI, and CnF.
Quick Helpful Hints:
To enter and exit Modes:
Press the
Temp
and
Start/Stop
buttons simultaneously.
To scroll through the parameters:
Press the
Temp
button.
To scroll through the modes or change values
for a parameter:
Press the
Up
and
Down
button
arrows.
Summary of Contents for X-STREAM WASH
