RFHU - Multiuse Operator’s Manual
22
RFHU OPERATING INSTRUCTIONS - Continued
For the user’s Account an “offline recipe set” will
always be available to the user. This information
will be saved and be readily available if a USB file is
required to be created.
The RFHU Configurator is available for well
programming.
As the unit is not connected the RFHU configura-
tion, for example 2x2, 2x4 will not be automatically
detected.
Instead a list of available configurations will be
available for programming.
NOTE:
H1 - Bottom Heat Only Unit Configurations
H2 - Top and Bottom Heat Unit Configurations
You must select the proper configuration for your
unit.
When a selected PHU configuration is selected the
appropriate programming grid will appear. For
example a 2x4 will appear as:
These include:
This can then be programmed in the same way as
the online RFHU. For example:
When finished select “DOWNLOAD PHU CONFIGU-
RATION FILE” option. This will create a RFHU “RCP”
file which contains both the recipe list and well
mapping settings.
This file can then be copied to the “root” directory of
a USB flash drive.
Plug this same USB drive into the USB port on an
RFHU and if the configuration is correct both the
recipe list and well programming will be uploaded
on the unit itself. A confirmation message will ap-
pear on the RFHU display when a new recipe set has
been successfully loaded.