21
RFHU - Multiuse Operator’s Manual
RFHU OPERATING INSTRUCTIONS - Continued
Another option available within the DCEP is to be
able to view the online RFHU Recipe List. This is
available by selecting “Recipes” under “Equipment
Dashboard” on the DCEP side menu.
A list of local recipes found on the RFHU will appear
here.
These can be edited, added, or deleted using
the appropriate function which will update the
connected RFHU local recipe set in real-time.
Selecting “Create Recipe” will load the following
form where a new recipe can be added. Fields
between “add” and “edit” are the same.
Fields consist of Recipe Name, Bottom Temp, Top
Temp, Cook More enabled, Cook More Message ID,
Cook more time, enabled/disabled and lid enabled/
disabled. When finished adding or editing select the
“SAVE” button. The updated recipe list will be sent
to the connected RFHU where it is updated in real
time.
NOTE:
H1 - Bottom Heat Only Unit Configurations
H2 - Top and Bottom Heat Unit Configurations
You must select the proper configuration for your
unit.
In some cases the connected RFHU unit may not be
online and connected to the DCEP. If this is the case
the RFHU recipe and programming settings can be
modified on the actual unit UI or alternatively the
RFHU Offline Configurator menu option can be used
on the DCEP.
This can be found under “Recipe” menu on the side
menu of the DCEP.
USB Programming
The “SHOW LEGEND” button can also be used to
display the full recipe list for the full account.
When grid programming has been completed a
completely programmed PHU looks like the below.
After programming the wells two options are then
available. “DOWNLOAD PHU CONFIGURATION
FILE” will create a local RCP formatted file with the
programming. Alternatively, the “SAVE button” can
selected. This will update the well programming on
the unit instantly from the DCEP to the RFHU unit
itself. This is a real-time recipe program update.