9
Installation and Operation of IRHU
INSTALLATION
UNPACKING UNIT
•
Inspect the shipping carton and/or container,
carefully noting any exterior damage on the delivery
receipt, which was not evident on the outside of the
shipping container (concealed damage). Contact
the carrier immediately and file a damage claim with
them. Save all packing materials when filing a claim.
Freight damage claims are the responsibility of the
purchaser and are not covered by the warranty.
•
Inspect unit for damage such as, broken glass, etc.
•
Report any dents or breakage to source of purchase
immediately.
•
Do not attempt to use unit if damaged.
•
Remove all materials from unit interior.
•
If unit has been stored in extremely cold area, wait
a few hours before connecting power.
UNIT PLACEMENT
•
Do not install unit next to or above source of heat,
such as oven or deep fat fryer.
•
Install unit on level countertop surface.
•
Outlet should be located so that plug is accessible
when the unit is in place.
Minimum Clearances
Side
Clearance
Right Side
0"
Left Side
0"
Rear
8"
Bottom
0"
Top
0"
Proper airflow around unit will cool the electrical
components. With restricted airflow, the unit may not
operate properly and the life of the electrical parts may
be reduced.
:
To avoid risk of electrical
shock or death, this unit must be grounded
and plug must not be altered.
EARTHING INSTRUCTIONS
Grounding reduces risk of electric shock by providing an
escape wire for the electric current if an electrical short
occurs. This unit is equipped with a cord having a grounding
wire with a grounding plug. The plug must be plugged into
an outlet that is properly installed and grounded.
Consult a qualified electrician or servicer if grounding
instructions are not completely understood, or if doubt
exists as to whether the oven is properly grounded.
Do not use an extension cord
. If the product power
cord is too short, have a qualified electrician install a
three-slot receptacle. This unit should be plugged into
a separate circuit with the electrical rating as provided
in product specifications.
EXTERNAL EQUIPOTENTIAL EARTHING
TERMINAL (EXPORT ONLY)
Equipment has secondary earthing terminal.
Terminal provides external earthing
connection used in addition to earthing prong
on plug. Located on outside of oven back,
terminal is marked with this symbol.
DIGITAL TIMERS
The digital pan timers count down in increments of one
minute. The table below lists the display appearance
corresponding to the actual hold time.
Digital Timer Displays
ACTUAL TIME (MIN)
PLAY TIME
0 – 59
00 – 59
60 – 119
1H
61 – 179
2H
180 – 239
3H
240
4H
270
4H
300
5H
330
5H
360
6H
390
6H
420
7H
450
7H
480
8H
510
8H
540
9H
570
9H