Duke DQ GEN-102, Operator’S Manual With Illustrated Parts List

Page: 29 / 105

185232 19
Soft Serve Freezer Model GEN-102
7 Operator Display Menus
(continued)
Operator’s Menu Options
• Basic Settings
• Actual Temps
• Event Log
• Error Log
• Lockouts
•
Screen Settings
• Date/Time
•
Last Clean
• Software Version
The following information explains more about each of the menu options.
Basic Settings: Information Shown
Product Type: Alt 1 (Preset for DQ Product)
Temperature Offset 1-9 5 is Neutral
Cabinet Temp. 6 is Default setting
Actual Temps: Information Shown
Cabinet Temperature
Cylinder Temperature: Left or Right Cylinder
Event Log: Allows the operator to look at logged events i.e. power switch cycle, low
mix, etc. The log will display the last 50 events with the newest event at
the top.
Error Log: Allows the operator to look at logged errors i.e. Barrel refrigeration
timeout, low/high refrigeration pressure, etc. The log will display the last
50 events with the newest event at the top.
Statistics : Shows the number of starts that the compressor/compressors,
switches and beater motors have seen. Also displays the cumulative
run time in hours for compressors and beater motors.
Information Shown
On Time Left & Right Barrel
Freeze Mode Left & Right Barrel
Standby Mode Left & Right Barrel
Off Left & Right Barrel
Last PWR Fail
All PWR Fail Time
All PWR Fails
Spigot Left & Right Barrel
Below is a list of the menu categories that are displayed upon entering the
Operator’s menu.