Duke Fitness XB30, Assembly And Operating Instructions Manual

Page: 14 / 36

14
EXERCISE BIKE XB30
Step 3: Mounting the seat
1. Remove the three washers (34) and the three nuts (35) from the seat cushion (56).
2. Match the bolt holes on the underside of the seat cushion (56) with the holes on the top of the
seat post (3). Attach the seat cushion (56) to the seat post (3) using three washers (34) and three
nuts (35). Tighten the cap nuts with the 13-19mm wrench.
3. After connecting the seat cushion (56) to the seat post (3), insert the seat post (3) through the
plastic bushing (57) and into the seat tube on the front frame (1).
4. Insert the adjustment knob (55) through the pre-drilled hole on the back of the front frame (1).
Turn the adjustment knob (55) clockwise and make sure that the safety pin on the adjustment
knob (55) can reach one of the holes on the seat post (3) before fully tightening.