Duke Fitness DU-T40, Assembly And Operating Instructions Manual

Page: 27 / 44

27
5 TROUBLESHOOTING, CARE AND MAINTENANCE
5.1 General Instructions
⚠
WARNING
+ Do not make any improper changes to the equipment.
⚠ CAUTION
+ Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the
contract partner. The equipment must not be used until it has been repaired. If necessary,
use only original spare parts.
࣑ ATTENTION
+ In addition to the instructions and recommendations for maintenance and care given here,
additional service and/or repair work may be necessary; this must only be carried out by
authorised service technicians.
5.2 Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors and
how to correct them. If the equipment still does not function properly, contact your contract partner.
Fault Cause Solution
Running mat grinds/
runs not straight
Running mat not centered
Adjust the running mat according to the
instructions
Running mag slips
through/stops
Tension/lubrication of
running mat not correct
Check the tension/lubrication of
the running mat according to the
instructions
Display shows
nothing
+ Safety Key missing
+ Power supply interrupted
+ Insert Safety Key
+ Check if power switch is on
+ Check cable connections
No pulse displayed
+ Not enough contact to
the sensors
+ Connection to the
console lost
+ Place your hands completely on the
hand pulse sensors
+ Check the cable connections