Duke Fitness DU-T40, Assembly And Operating Instructions Manual

Page: 20 / 44

20
TREADMILL T40
3.3.3 Pre-set Profile Programmes
There are a total of 36 pre-set profile programmes available.
1. To select one of the pre-set profile programmes, press the PROGRAM button.
L
NOTICE
When you press the PROGRAM button, the view changes in the order of P1–P36.
As soon as one of the programs is selected, the value for the time flashes.
2. To adjsut the value for time, use the +/- buttons for speed on the console or on the handrail.
3. To start the target programme, press the START/PAUSE button.
The display counts down from 5 to 1, then a beep will sound and the programme will start.
L
NOTICE
You can adjust the incline and speed during training with the respective buttons on the console
or on the handrails.
4. Press the START/PAUSE button to pause the programme or the STOP button to end the
programme.