Duke Fitness DU-T40, Assembly And Operating Instructions Manual

Page: 22 / 44

22
TREADMILL T40
3.3.4 User-Defined Programmes
There are a total of three user-defined programmes (U01–U03) available with each ten sections to
be set.
1. To select one of the user-defined programmes, press the PROGRAM button.
L
NOTICE
The user-defined programmes are placed in the sequence behind the preset programmes.
L
NOTICE
If you have already created a user-defined programme, press the MODE button and set the time.
You can then press the START/PAUSE button to start the program.
2. Press the MODE button twice.
The value for speed flashes.
3. To adjust the value for the speed, use the +/- buttons for speed on the console or on the handrail.
4. To move the the next value to be set, press the MODE button.
L
NOTICE
As soon as you press the MODE button, the entered value is automatically saved.
The value for incline flashes.
5. To adjust the value for the incline, use the +/- buttons for the incline on the console or on the
handrai.
6. To move the the next section to be set, press the MODE button.
7. Repeat the steps 3 to 6 for all ten sections.
8. After setting the incline for the last section, press the MODE button again.
The value for time flashes.
9. To set the total time for the programme, use the +/- buttons for speed on the console or on the
handrail.
10. To start the target programme, press the START/PAUSE button.
The display counts down from 5 to 1, then a beep will sound and the programme will start.
L
NOTICE
After starting the programme, the programme is automatically saved and can immediately be
started the next time when the total time is set.
11. Press the START/PAUSE button to pause the programme or the STOP button to end the
programme.