Dukane ImagePro 8776 User Manual Download Page 102

Page: 102 / 126

Settings

Schedule Settings

Displays and configures schedule settings.

Item

Description

Daily

Configures the daily schedule.

Schedule

Click the

[Enable]

check box to enable daily scheduling.

Schedule List

Displays the current daily schedule.

Sunday

Configures the Sunday schedule.

Schedule

Click the

[Enable]

check box to enable Sunday scheduling.

Schedule List

Displays the current Sunday schedule.

Monday

Configures the Monday schedule.

Schedule

Click the

[Enable]

check box to enable Monday scheduling.

Schedule List

Displays the current Monday schedule.

Tuesday

Configures the Tuesday schedule.

Schedule

Click the

[Enable]

check box to enable Tuesday scheduling.

Schedule List

Displays the current Tuesday schedule.

Wednesday

Configures the Wednesday schedule.

Schedule

Click the

[Enable]

check box to enable Wednesday scheduling.

Schedule List

Displays the current Wednesday schedule.

Thursday

Configures the Thursday schedule.

Schedule

Click the

[Enable]

check box to enable Thursday scheduling.

Schedule List

Displays the current Thursday schedule.

Friday

Configures the Friday schedule.

Schedule

Click the

[Enable]

check box to enable Friday scheduling.

Schedule List

Displays the current Friday schedule.

Saturday

Configures the Saturday schedule.

Schedule

Click the

[Enable]

check box to enable Saturday scheduling.

Schedule List

Displays the current Saturday schedule.

Summary of Contents for ImagePro 8776































































































































Search results

Summary of Contents for ImagePro 8776

Reviews:

Related manuals for ImagePro 8776

Brands by name

Popular brands

Dukane ImagePro 8776, User Manual

Search results

Summary of Contents for ImagePro 8776

Reviews:

Related manuals for ImagePro 8776

Brands by name

Popular brands