manualshive.com logo in svg

Dukane ImagePro 8776, User Manual

Share
Download
Dukane ImagePro 8776 User Manual Download Page 107

Click the 

[Apply]

 button to save the settings.

Authentication 
Password

Configures the Authentication Password.

The length of the text can be up to 16 alphanumeric 

characters.

Re-enter Authentication 
Password

Used to re-enter the above password for verification.

SNMP

Configures the community name if SNMP is used.

Community Name

Configures the community name.

The length of the text can be up to 64 alphanumeric 

characters.

• The new configuration settings are activated after restarting the 

network connection. The network connection must be restarted when the 

configuration settings are changed. The network connection can be restarted 

using 

[Network Restart]

 on the main menu.

NOTE

Item

Description

Network Control

Configures the Authentication Password for the command 

control.

Settings

Security Settings (Continued)

Summary of Contents for ImagePro 8776































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands