manualshive.com logo in svg

Dukane ImagePro 8776, User Manual

Share
Download
Dukane ImagePro 8776 User Manual Download Page 106

20

Settings

Security Settings

Item

Description

Administrator authority

Configures the Administrator ID and Password.

Administrator ID

Configures the Administrator ID.

The length of the text can be up to 32 alphanumeric 

characters.

Administrator 
Password

Configures the Administrator Password.

The length of the text can be up to 255 alphanumeric 

characters.

Re-enter Administrator 
Password

Re-enter the above password for verification.

Displays and configures passwords and other security settings.

User authority

Configures the User ID and Password.

User ID

Configures the User ID.

The length of the text can be up to 32 alphanumeric 

characters.

User Password

Configures the User Password.

The length of the text can be up to 255 alphanumeric 

characters.

Re-enter User 
Password

Used to re-enter the above password for verification.

Summary of Contents for ImagePro 8776































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands