61
IMAGE menu
Item
Description
OVER SCAN
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture)
ó
Large (It reduces picture)
• This item can be selected for a video signal.
• For HDMI
TM
, MHL and
HDBaseT
TM
signals, this item can also be
selected if either (1) or (2) applies.
(1) DIGITAL FORMAT item in the INPUT menu for selected port is
set to VIDEO.
(2) DIGITAL FORMAT item in the INPUT menu for selected port is
set to AUTO, and the projector recognizes that it receives video
signals.
V POSITION
Using the ◄/► buttons adjusts the vertical position.
Down
ó
Up
• Over-adjusting the vertical position may cause noise to appear on
the screen. If this occurs, please reset the vertical position to the
default setting. Pressing the
RESET
button when the V POSITION
is selected will reset the V POSITION to the default setting.
• When this function is performed on a video signal, the range of
this adjustment depends on OVER SCAN (
above
) setting. It is not
possible to adjust when OVER SCAN is set to 10.
• This function is unavailable for a signal from the
LAN
,
HDMI 1 /
MHL, HDMI 2 or
HDBaseT
port.
H POSITION
Using the ◄/► buttons adjusts the horizontal position.
Right
ó
Left
• Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, please reset the horizontal position to the
default setting. Pressing the
RESET
button when the H POSITION is
selected will reset the H POSITION to the default setting.
• When this function is performed on a video signal, the range of
this adjustment depends on OVER SCAN (
above
) setting. It is not
possible to adjust when OVER SCAN is set to 10.
• This function is unavailable for a signal from the
LAN
,
HDMI 1 /
MHL, HDMI 2 or
HDBaseT
port.
(continued on next page)
