Dukane 8106H User Manual Download

Page: 101 / 106

Troubleshooting

Regarding the indicator lamps (continued)

• When the interior portion has become overheated, for safety purposes,

the projector is automatically shut down, and the indicator lamps may also be

turned off. In such a case, disconnect the power cord, and wait at least 45 minutes.

After the projector has sufficiently cooled down, please make confirmation of the

attachment state of the lamp and lamp cover, and then turn the power on again.

NOTE

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Blinking

Red

Lighting

Red

Turned

off

Lighting

Red

There is a possibility that the interior portion

has become heated.

Please turn the power off, and allow the projector to cool down at least

20 minutes. After the projector has sufficiently cooled down, please make

confirmation of the following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air filter dirty?

• Does the peripheral temperature exceed 35°C?

• Is the projector used at an altitude of about 1600 m or

higher? If the projector is used at an altitude of about

1600 m or higher, set FAN SPEED of the SERVICE

item in the OPTION menu to HIGH

(



)

Lighting

Red

Turned

off

Turned

off

The lens door is not opened properly.

One of the followings has been happened.

• The lens door is not opened properly, when the projector

is turned on.

• The lens door position is shifted, while the projector is working.

Restart the projector, after confirming that there is nothing

that the lens door hits while opening or closing.

Lighting

Green

Simultaneous

blinking in

Red

It is time to clean the air filter.

Please immediately turn the power off, and clean or

change the air filter referring to the section “Cleaning

and replacing the air filter”. After cleaning or changing

the air filter, please be sure to reset the filter timer.

After the remedy, reset the power to ON.

Lighting

Green

Alternative

blinking in

Red

There is a possibility that the interior portion

has become overcooled.

Please use the unit within the usage temperature

parameters (5°C to 35°C).

After the treatment, reset the power to ON.

Blinking In

Green

for

approx. 3

seconds.

Turned

off

Turned

off

At least 1 Power ON schedule is saved to the

projector.

Please refer to

Schedule Settings

section of

User’s

Manual - Network Guide.

Summary of Contents for 8106H











































































































Search results

Summary of Contents for 8106H

Reviews:

Related manuals for 8106H

Brands by name

Popular brands

Dukane 8106H, User Manual

Search results

Summary of Contents for 8106H

Reviews:

Related manuals for 8106H

Brands by name

Popular brands