4. Using On-Screen Menu
79
[OPTIONS(2)]
Selecting Power-saving in [STANDBY MODE]
Set the mode after turning off the power of the projector.
NORMAL
The projector will go into the standby mode, lowering the power con-
sumption. The POWER indicator flashes in orange.
When [NORMAL] is selected, only the following buttons and feature will
work:
POWER button on the projector cabinet and the remote control, powering
on from PC Control command, and [AUTO POWER ON].
Power consumption:
Low
NETWORK STANDBY
The projector goes into the network standby mode. The power supply of
the projector can be turned on using a wired LAN (LAN port).
The POWER indicator lights up in orange.
When [NETWORK STANDBY] is selected, only the following buttons,
terminals, and features will work:
POWER button on the projector cabinet and the remote control, powering
on from PC Control command, [AUTO POWER ON], [NETWORK SERVICE].
Power consumption:
Medium
SLEEP
The projector is maintained in the sleep mode. In addition to the buttons,
terminals and functions that operate in the network standby mode, you
can operate the projector with a HDBaseT-compatible transmission device
connected to the Ethernet/HDBaseT port.
POWER indicator lights up in green.
Power consumption:
High
