Dukane 6647W User Manual Download

Page: 134 / 144

123

8. Appendix

❹

Attaching the Optional Cable Cover (NP12CV)

After finishing connections, attach the supplied cable cover to properly hide the cables.

CAUTION:

• Be sure to tighten the screws after attaching the cable cover. Failure to do so may cause the cable cover to

come off and fall, resulting in injury or damage to the cable cover.

• Do not put bundled cables in the cable cover. Doing so may damage the power cord, resulting in a fire.
• Do not hold the cable cover while moving the projector or do not apply excessive force to the cable cover.

Doing so may damage the cable cover, resulting in injury.

Attaching the cable cover

Tool needed:

• Phillips screwdriver (plus-head) about 12 cm/4.7 inches in length

12 cm/4.7 inches

1. Align the left and right fixing screw holes on the cable cover

and the projector, and then put screws to each hole.

NOTE:

• Be careful not to get cables caught in between the cable cover and the

projector.

Cable cover fixing screw hole

Fixing screw

2. Tighten the cable cover screws.

• Be sure to tighten the screws.

Summary of Contents for 6647W

















































































































































Search results

Summary of Contents for 6647W

Reviews:

Related manuals for 6647W

Brands by name

Popular brands

Dukane 6647W, User Manual

Search results

Summary of Contents for 6647W

Reviews:

Related manuals for 6647W

Brands by name

Popular brands