22
2. Projecting an Image (Basic Operation)
❼
Optimizing Computer Signal Automatically
Adjusting the Image Using Auto Adjust
Optimizing a computer image automatically. (COMPUTER)
Press the AUTO ADJ. button to optimize a computer image automatically.
This adjustment may be necessary when you connect your computer
for the first time.
[Poor picture]
[Adjusted picture]
NOTE:
Some signals may take time to display or may not be displayed correctly.
• If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE] manually.
(
→
page
❽
Turning Up or Down Volume
Sound level from the speaker or audio output can be adjusted.
TIP: When no menus appear, the
◀
and
▶
buttons on the projector cabinet
work as a volume control.
NOTE:
• Volume control is not available with the
◀
or
▶
button when an image
is magnified by using the D-ZOOM (+) button or when the menu is
displayed.
• Volume control is not available with the
◀
or
▶
button when VIEWER
is used.
TIP: The [BEEP] sound volume cannot be adjusted. To turn off the [BEEP]
sound, from the menu, select [SETUP]
→
[OPTIONS (1)]
→
[BEEP]
→
[OFF].
Increase volume
Decrease volume
Summary of Contents for 6647W
Page 98: ...87 6 Installation and Connections ...
Page 101: ...90 6 Installation and Connections ...
