Dukane 6645UL User Manual Download

Page: 78 / 172

4. Using On-Screen Menu

[CONTRAST]

Adjusts the intensity of the image according to the incoming signal.

[BRIGHTNESS]

Adjusts the brightness level or the back raster intensity.

[SHARPNESS]

Controls the detail of the image.

[COLOR]

Increases or decreases the color saturation level.

[HUE]

Varies the color level from +/− green to +/− blue. The red level is used as reference.

Input signal

CONTRAST

BRIGHTNESS

SHARPNESS

COLOR

HUE

COMPUTER/HDMI (RGB)

Yes

COMPUTER/HDMI
(COMPONENT)

Yes

USB-A, LAN

Yes

Yes = Adjustable, No = Not adjustable

[RESET]

The settings and adjustments for [PICTURE] will be returned to the factory settings with the excep-

tion of the following; Preset numbers and [REFERENCE] within the [PRESET] screen.

The settings and adjustments under [DETAIL SETTINGS] within the [PRESET] screen that are not

currently selected will not be reset.

Summary of Contents for 6645UL













































































































































































Search results

Summary of Contents for 6645UL

Reviews:

Related manuals for 6645UL

Brands by name

Popular brands

Dukane 6645UL, User Manual

Search results

Summary of Contents for 6645UL

Reviews:

Related manuals for 6645UL

Brands by name

Popular brands