21
R
P
R
/C
R
G
Y
B
P
B
/C
S
V
DVI
H/C
S
PC1
PC3
PC2
AUDIO IN
REMOTE
DC OUT
5V
}
1.5A
RS-232C OUT
RS-232C IN
Y/C
VIDEO
CONTROL
VIDEO IN
Video Device 1
Video Device 2
VCR (Video cassette recorder)
S-video cable
(separately available)
PC Audio cable
(separately available)
AV connection
cable (separately
available)
BNC Cable (separately available)
W-VHS or DVD player etc.
Laser videodisc player
Camcorder
Right side of projector
Image input
• Connect a composite image signal output
device or Y/C (S-video) image output de-
vice.
Sound input
• Connect to AUDIO IN terminal.
Image input
• Connect to component signal out-
put device, DTV format signal out-
put device, etc.
• When the PC2 input terminal is
used, the “PC2(BNC)” item in
“Options” menu must be correctly
set. (
☞
page 39)
Sound input
• Connect to AUDIO IN terminal.
Connecting to Various Devices
Before connection, be sure to turn off both the projector and the device.
Connecting to Video Devices
• Thoroughly read the manual that comes with each video device.
• Use the supplied AV connection cable. S-video [Y/C] cable, BNC cable and PC Audio cables are not supplied.
Connection
• When connecting a video device, please use a TBC along with it, or use one with a built-in TBC.
• Use of an extension cable to connect a video device and the projector could cause image deterioration or projection failure.
• When a signal with much jitter is reproduced on a VCR, or special-effect playbacks are performed, the upper part of the
image or the screen may be interrupted, erased or distorted.
Connecting to Devices
