Duevi Photon System, Installation Manuals

Page: 4 / 20

PHOTON SYSTEM
–
Installation Guide v8.0 - pag.4
The ID number of the bar (address) must be set as follows:

1 and 2 for the first couple (zone ‘A’),

3 and 4 for the second couple (zone ‘B’)

5 and 6 for the third couple (zone ‘C’)

7 and 8 for the fourth couple (zone ‘D’).
NOT HEATED version has a double row of contacts on which a jumper is inserted in the position
corresponding to the address to assign to the bar (Fig 11).
Fig 11
–
Addressing of the NOT HEATED version
HEATED version , due to the presence of the heater, has a single row of contacts on which a jumper
is inserted in the position corresponding to the address to assign to the bar (Fig 12). Pay great attention
to this, because due to the small space available, it is easy to fall into error.
Fig 12
–
Addressing of the HEATED version