DUERR-NDT CR 43 NDT, Installation And Operating Instructions Manual

Page: 8 / 36

8
9000-608-21/30 2013/10/21
2.2 Electrical safety instructions
• The appliance may only be connected to a
correctly installed electrical socket
• Connection to a multi-socket power strip is
not permitted
• Before connecting to the electricity supply, the
appliance must be inspected and checked to
ensure that the supply voltage and the supply
frequency correspond to that of the local
electrical supply
• Before initial use and start-up, the appliance
and all supply lines must be checked for any
signs of damage Damaged supply lines and
connections must be replaced immediately
• Never touch persons and open connectors of
the appliance simultaneously
• When using the appliance, observe all the
relevant electrical safety procedures
Before opening the device, un-
plug at the mains and remove all
power mains plug!
EN