Dudek GLOBE 120, User Manual

Page: 23 / 24

21
14. Placing parachute in a harness-integrated container.
Connect the connecting riser with harness risers.
Attach release handle to the bag.
Put parachute in harness container. Close container using release handle pin.
Make sure the pin is secured, so that it will not drop out on its own.
It is recommended to have the container pin sealed by an authorised rigger with a
thread of max. 5 kg tenacity.
15. Everyday use inspection
Loops and pins closing the container require constant monitoring.
Before each start you should check if:
$
the pins are not loose (can result in unexpected opening)
$
no part is blocking the pins, thus making release impossible.
Parachute must be kept clean and dry at all times.
16. Test results
Test results showing compliance with EN 12491:2001 are available at the
manufacturer.
USER MANUAL