7
8.
Packing the system
Before you start packing your parachute, it needs to be aired (that is - spread
the
canopy and straighten lines for 24 hours in a dry place of room temperature).
Then carefully check the canopy gore by gore, as well as suspension lines and
connecting riser
for any damages.
Smooth and clean surface (a table would be best) of at least 7
-10m
x 1,
0
m
dimensions is required for packing the system.
Fix the
connecting riser
to the edge of table and spread the parachute flat.
Find the first outer suspension line and keeping it in hand go to a data sheet
gore. Further along this line there are assistance straps sewn into top part of the
canopy. Lead an
assistance line
through these loops
and fix it to the other
edge of the table.
Start packing from
the data sheet gore.
The bag must be equipped with new elastic loops. Have more new loops at
hand, to keep the chute suspension lines sorted.
USER MANUAL
Summary of Contents for GLOBE 120
