Ducati SUPERBIKE 1299 PANIGALE S Owner'S Manual Download Page 73

Page: 73 / 336

DTC

RIDING MODE

USE

DEFAULT

OFF

The DTC is disabled.

TRACK Professional

This level is designed for exclusive track

use and for very expert riders. It is opti-

mized for Pirelli tires with SC2 com-

pound. In this mode, the DTC allows

sideslipping.

TRACK

This level is designed for exclusive track

use and for very expert riders. It is opti-

mized for OEM tires. In this mode, the

DTC allows sideslipping.

SPORT / TRACK

This level is designed for track use and

for expert riders. In this mode, the DTC

allows sideslipping.

It is the default level for the

"RACE" Riding Mode

SPORT / TRACK

This level is designed for track use (and

road use, for expert riders).

SPORT

This level is designed for riding on the

road or on the track, consistent with EN-

GINE 195cv LOW setting (maximum

power 195HP, with Smooth delivery).

It is the default level for the

"SPORT" Riding Mode

SAFE & STABLE

This level is designed for use in any rid-

ing conditions, on the road with good

grip.

Summary of Contents for SUPERBIKE 1299 PANIGALE S

















































































































































































































































































































































Search results

Summary of Contents for SUPERBIKE 1299 PANIGALE S

Reviews:

Related manuals for SUPERBIKE 1299 PANIGALE S

Brands by name

Popular brands

Ducati SUPERBIKE 1299 PANIGALE S, Owner'S Manual

Search results

Summary of Contents for SUPERBIKE 1299 PANIGALE S

Reviews:

Related manuals for SUPERBIKE 1299 PANIGALE S

Brands by name

Popular brands