Ducati SUPERBIKE 1299 PANIGALE S Owner'S Manual Download Page 101

Page: 101 / 336

Menu 1: Odometer (TOT)

The odometer counts and displays the total distance

covered by the vehicle with the set unit of

measurement (mi or km).

The odometer number of mi or km is displayed with

the TOT indication and unit of measurement. When

the maximum value is reached (199999 mi or 199999

km) the instrument panel will permanently display

said value.

The odometer value is saved permanently and cannot

be reset under any circumstances.
The reading is not lost in case of a power off (Battery

Off).

Note

Upon Key-ON, the instrument panel always

shows the Odometer indication for 10 seconds, then

shows the user's settings page.

Note

If a string of flashing dashes " ----- " is displayed

within odometer function, please contact a Ducati

Dealer or Authorised Service Centre.

Summary of Contents for SUPERBIKE 1299 PANIGALE S

















































































































































































































































































































































Search results

Summary of Contents for SUPERBIKE 1299 PANIGALE S

Reviews:

Brands by name

Popular brands

Ducati SUPERBIKE 1299 PANIGALE S, Owner'S Manual

Search results

Summary of Contents for SUPERBIKE 1299 PANIGALE S

Reviews:

Brands by name

Popular brands