Ducati SUPERBIKE 1299 PANIGALE S Owner'S Manual Download Page 10

Page: 10 / 336

Permitted use

This motorcycle must be used only on road surfaces

with asphalt or flat and even pavement. This

motorcycle may not be used on dirt roads or for off-

road riding.

Attention

Using the bike off-road may cause the rider to

lose control, which in turn may lead to vehicle

damage, injury or death.

Attention

This motorcycle must not be used for towing or

for the addition of a sidecar, since this may cause a

loss or control and consequent accident.

This motorcycle carries the rider and may carry one

passenger upon installation of a dedicated kit

performed exclusively at a Ducati Dealer or

Authorized Service Center.

Attention

The total weight of the motorcycle in running

order with rider, passenger, baggage and additional

accessories must not exceed 816 lb/ 370 kg.

Summary of Contents for SUPERBIKE 1299 PANIGALE S

















































































































































































































































































































































Search results

Summary of Contents for SUPERBIKE 1299 PANIGALE S

Reviews:

Brands by name

Popular brands

Ducati SUPERBIKE 1299 PANIGALE S, Owner'S Manual

Search results

Summary of Contents for SUPERBIKE 1299 PANIGALE S

Reviews:

Brands by name

Popular brands