Ducati SUPERBIKE 1299 PANIGALE S Owner'S Manual Download Page 48

Page: 48 / 336

During this check stage, if the vehicle speed exceeds

6 mph (10 km/h) (actual speed), the instrument panel

will stop:
-

the display check routine and display the

Standard Screen containing updated information;

the warning light check routine and leave on only

the warning lights that are actually active at the

moment.

Note

When turning the key to OFF, motorcycle

power is cut only after 70 seconds and not

immediately.

Note

Upon every key-on, any suspension setting

changes are not implemented until vehicle speed

exceeds 5 Km/h.

Summary of Contents for SUPERBIKE 1299 PANIGALE S

















































































































































































































































































































































Search results

Summary of Contents for SUPERBIKE 1299 PANIGALE S

Reviews:

Related manuals for SUPERBIKE 1299 PANIGALE S

Brands by name

Popular brands

Ducati SUPERBIKE 1299 PANIGALE S, Owner'S Manual

Search results

Summary of Contents for SUPERBIKE 1299 PANIGALE S

Reviews:

Related manuals for SUPERBIKE 1299 PANIGALE S

Brands by name

Popular brands