Ducati Panigale V4 R, Owner'S Manual

Page: 259 / 365

Adjusting the position of the
gearchange pedal and rear brake
pedal
The position of the gearchange and rear brake
pedals in relation to the footrests can be adjusted to
suit the requirements of the rider.
Adjust the pedals as follows:
Gear change pedal
To correctly operate on the rod, remove the relevant
side fairing.
Attention
Have the gearchange rod adjusted at a Ducati
Dealer or authorised Service Centre.
Hold linkage (1) using the special flat (A) and loosen
nut (2).
Fit an open-end wrench to hexagonal element of
linkage (1) and rotate until setting pedal in the
desired position.
Tighten nut (2) onto linkage.
Fig 206
1 2
A
Fig 207
258