Ducati MULTISTRADA 950 Page 276 Owner'S Manual Download

Page: 276 / 293

Important

Do not use any additives in fuel or lubricants. Using them could result in severe damage of the engine

and motorcycle components.

Attention

The motorcycle is only compatible with fuel having a maximum content of ethanol of 10% (E10).

Using fuel with ethanol content over 10% is forbidden. Using it could result in severe damage of the engine

and motorcycle components. Using fuel with ethanol content over 10% will make the warranty null and void.

Important

These references indicate the fuel recommended for this vehicle as specified by the European

regulation EN228.

275

Summary of Contents for MULTISTRADA 950






































































































































































































































































































Search results

Summary of Contents for MULTISTRADA 950

Reviews:

Related manuals for MULTISTRADA 950

Brands by name

Popular brands

Ducati MULTISTRADA 950, Owner'S Manual

Search results

Summary of Contents for MULTISTRADA 950

Reviews:

Related manuals for MULTISTRADA 950

Brands by name

Popular brands