background image

Turn indicator automatic switch-off

feature (TURN INDICATORS)

This function allows user to set the strategy for

automatically switching off the turn indicators based

on lean angle, vehicle speed and distance run to

manual mode (MANUAL) or automatic mode

(AUTO).

Enter the SETTING MENU.

Select “TURN INDICATORS” by pressing button (1)

or (2).

Once function is highlighted, press button (4).
When entering this function, the instrument panel

will display the currently set mode flashing.
With buttons (1) and (2) it is possible to select the

"AUTO" or "MANUAL" values.

Press button (4), instrument panel will set the

selected mode and then go back to previous screen.
To exit and go back to the previous displaying mode

without editing the parameter, keep button (2)

pressed for 2 seconds.

1

2

4

Fig 96

1

2

4

Fig 97

144

Summary of Contents for MULTISTRADA 950






































































































































































































































































































Reviews: