31
E
When you switch the LAP function off from the menu,
the lap in progress will not be saved.
If the LAP function is active and the display is suddenly
switched off (Key-Off), the LAP function is switched off
automatically (even if the timer was ON, the lap in progress
is not saved).
If the timer is not stopped, when it reaches 9 minutes,
59 seconds and 99 hundredths of a second, it restarts from
0 (zero) and continues until the function is switched off.
If however the LAP function is switched on and the memory
has not been cleared, but fewer than 30 laps have been saved
(e.g. 18 laps), the display will save any remaining laps until the
memory is full (in this case, it will save a further 12 laps).
This function only displays lap times once; however, lap times
are saved for subsequent display in the Lap Memory function.
fig. 23
“NORMAL” display
Press FLASH (Once)
Press FLASH (Twice)
Press FLASH
(from 32
nd
time onwards, unless times are reset)
for
10 secs.
for
3 secs.
for
10 secs.