56
E
Start with this position and turn the adjuster counterclockwise.
Count the clicks, which correspond to position 1, 2 and so forth.
The STANDARD factory settings are as follows:
1100
compression:
1.5 turns ± 1/4 turn;
rebound:
1.5 turns ± 1/4 turn.
Spring preload (A, fig. 47): 10 mm (3 turns from fully open
position).
To adjust the preload of the spring inside each fork leg, turn the
hexagonal adjuster nut (2, fig. 46 with a 22 mm hex wrench.
1100S
compression: 8 clicks;
rebound: 12 clicks.
Spring preload: 10 mm (3 turns from fully open position).
To change the spring preload for each fork leg, turn the
adjuster (2, fig. 47) with a 22 mm hex wrench.
Important
Adjust both fork legs to the same setting.
3
fig. 48
1100
3
1100S
fig. 49