Ducati HYPERMOTARD 1100, Owner'S Manual

Page: 47 / 120

46
E
Setting the gear change and rear brake
pedals
The gear change and rear brake pedals can be adjusted to
suit the preferred riding position of each rider.
Adjust the pedals as follows:
Gear change pedal
(fig. 32)
Apply an open-end wrench to the flats (2) to lock out linkage
(1) rotation and loosen the check nut (3).
Unscrew the screw (4) to release the linkage (1) from the
gear change lever.
Turn suitable flat (2) on linkage (1) and rotate until setting
pedal in the desired position.
Secure the gear change lever to the linkage (1) with the
screw (4).
Tighten the check nut (3) onto the linkage (1).
3 4 1
2
fig. 32
UM_HYM1100_S_09_e.book Page 46 Monday, June 16, 2008 1:06 PM