Ducati HYPERMOTARD 1100, Owner'S Manual

Page: 29 / 120

28
E
USB Data Logger
This function lets you activate the USB data logger: the data
logger must be connected to vehicle wiring.
To enable the data logger, enter the menu and set the "LAP"
function to "ON" by holding button (1, fig. 8) pressed in
position B “
▼
“.
The START/STOP control for the data logger lap separator is
the high-beam flasher button FLASH (12, fig. 5) on the LH
switch.
If the key is turned to Off (Key-Off) while the LAP function is
active and the (USB) data logger is operating, the function is
disabled automatically
UM_HYM1100_S_09_e.book Page 28 Monday, June 16, 2008 1:06 PM