19
DUCATI
actuator model EVO 700T
Installation diagram
DUCATI
actuator model EVE 900
Installation diagram
EVE900 FC
EVE900 FCA (with on board open & closed
position mechanical limits)
each model is also available in 24V version
TAB
A-9
A-11
A-13
A-15
A-17
A-19
A-210
A-23
A-25
B-8
105°12sec 115°15sec 125°15sec 130°20sec 130°27sec 140°25sec 135°27sec 90°
105°
B-9
105°13sec 115°15sec 120°18sec 125°20sec 130°23sec 135°25sec 120°
90°
105°
B-12 100°14sec 110°17sec 115°19sec 120°21sec 120°23sec 125°26sec 120°
90°
105°
B-15 105°17sec 105°19sec 110°21sec 115°23sec 120°26sec 125°28sec 125°30sec
B-18 100°18sec 105°20sec 110°23sec 115°25sec 115°27sec 120°29sec 100°28sec
B-21 105°20sec 100°22sec 105°24sec 110°26sec 110°28sec
B-25
95°23sec 100°25sec 105°27sec 110°29sec 110°31sec
B-29
95°27sec 100°28sec 100°30sec 105°32sec
B-33
95°30sec 95°32sec 90°32sec
B-35
95°32sec 95°33sec
PUSH TO OPEN OPERATION (opens towards outside)
If your driveway slopes up after the gate, preventing it from swin-
ging in. This means the gate operator is mounted on the inside
of the property and pushes your gate out away from the property.
Warning: only compatible with telescopic tube actuators, Check
the overall dimensions before installation
.
Warning:remember to reverse the polarity of the motor cables
when connecting to the electronic board
Multi-position fixing braket:
choose the hole most suitable to your gate.
NOT POSSIBLE WITH THIS ACTUATOR MODEL: IT REQUIRES TELESCOPIC ACTUATORS
OUTSIDE
In line with center hinge
260 mm - 760mm
140 mm
Maximal wing dimension:
Maximal wing lenght: up to 4m/ 14 ft
Maximal wing weight: up to 450kg/ 1000lb
METRIC CONVERSION
1 cm = 1⁄2
”
= 0,3
”
10 cm = 4
”
12 cm = 4
3⁄4”
= 4,7
”
14 cm = 5
1⁄2”
= 5,5“
16 cm = 6
1⁄5”
= 6,2
”
18 cm = 7
”
20 cm = 7
7/8”
= 7,87
”
25 cm = 9
3/4"
= 9,8
”
35cm = 13
4/5
= 13,7
”
40 mm
100 mm
50 mm
105 mm
70 mm
120 mm
30 mm
front fixing bracket
multiposition post
fixing bracket
multiposition post
fixing bracket with op-
tional additional bra-
cket # EVE PLAK
70 mm
EVE PLAK
measures are in cm
Rear pivot point of gate opener
INSIDE
PULL TO OPEN OPERATION ( opens towards inside)
This means the gate operator is mounted on the inside
of the property and pulls your gate in towards the property to open.
