background image

English

Owner’s manual

DSC4200 

CHAIN SA

W

31

Before starting engine

Check working place, the cutting object and 
cutting direction. It there is obstacle, remove it.
Never start cutting until you have a clear work 
area, secured footing and a planned retreat 
path from the falling tree.
Use caution and keep bystanders and animals 
out of the working area whose diameter is 2.5 
times of the cutting object.
Inspect the machine for worn, loose, or  
amaged parts. Never operate the machine
that is damaged, improperly adjusted, or is not 
completely and securely assembled.
Make sure that the saw chain stops moving 
when the throttle control trigger is released.

When starting the engine

Always hold the machine firmly with both 
hands when the engine is running. Use a firm 
grip with thumb and fingers encircling the 
handles.
Keep all parts of your body away from the 
machine when the engine is running.
Before starting the engine, make sure the saw 
chain is not contacting anything.

Operation

Keep the handles dry, clean and free of oil or 
fuel mixture.
Never touch the muffler, spark plug or other 
metallic parts of the engine while the engine is 
in operation or immediately after stopping the 
engine. Doing so could result in serious burns 
or electrical shock.
Use extreme caution when cutting small size 
brush and saplings because slender material 
may catch the saw chain and be whipped 
toward you or pull you off balance.
When cutting a limb that is under tension, be 
alert for spring back so that you will not be 
struck when the tension in the wood fibers is 
released.
Check the tree for dead branches that could 
fall during the felling operation.
Always shut off the engine before setting it 
down.

(5) Ear protectors

b. And you should carry with you.

1. Attached tools and files.
2. Properly reserved fuel and chain oil.
3. Things to notify your working area (Rope, 

warning signs)

4. Whistle (for collaboration or emergency)
5. Hatchet or saw (for removal of obstacles)

c. Never use the product when wearing pants 

with loose cuffs, when wearing sandals, or 
when barefoot.

Warning considering handling of fuel

a. The engine of this product is designed to 

run on a mixed fuel which contains highly 
flammable gasoline. Never store cans of 
fuel or refill the fuel tank in any place where 
there is a boiler, stove, wood fire, electrical 
sparks, welding sparks, or any other source 
of heat or fire which might ignite the fuel.

b. Smoking while operating the product or 

refilling its fuel tank is extremely dangerous. 
Always be sure to keep lit cigarettes away 
from the product at all times.

c. When refilling the tank always turn off the 

engine first and take a careful look around to 
make sure that there are no sparks or open 
flames anywhere nearby before refueling.

d. If any fuel spillage occurs during refueling, 

use a dry rag to wipe up spills before turning 
the engine back on again.

e. After refueling, screw the fuel cap back 

tightly onto the fuel tank and then carry the 
product to a spot 3m or more away from 
where it was refueled before turning on the 
engine.

NOTE

If fuel or product is ignited, please put out fire 
with dry powder fire extinguisher.

Summary of Contents for DCS4200





















































Reviews: