background image

English

Owner’s manual

DSC4200 

CHAIN SA

W

29

2. GRAPHIC WARNINGS

This graphic accompanied by the 
words WARNING and DANGER calls 
attention to an act of a condition which 
can lead to SERIOUS INJURY.

 

Warning! Danger of kickback.

 

Avoid bar nose contact.

The guard tip device on your bar nose 
prevents kickback.

Read your product literature.

Wear hearing and eye protection
devices.

Hold tool with both hands!

 

IMPORTANT 

If warning seals peel off or 

become soiled and impossible to read, you 
should contact the dealer from which you 
purchased the product to order new seals and 
affix the new seal(s) in the required location(s).

 

WARNING 

Never remodel the product. We 

won’t warrant the machine, if you use the 
remodeled product or you don’t observe the 
proper usage written in the manual.

Thank you for purchasing our chain saw.
This manual contains information on operation 
and maintenance of the chain saw, which is 
based on the most recent product information 
available at the time of approval for printing. 
We reserve the right to make amendments 
without advance notice and without incurring 
any obligation for sequences.

This manual should be considered a 
permanent part of the chain saw, and remain 
with it if it is resold.

1. SAFETY INFORMATION

Safety is very important for you and others. We 
have written down important safety information 
in both manual and machine. Please read it 
carefully.

Safety information gives you warning that you 
may bring potential danger to yourself and 
others. The key words with “!” are put before 
every piece of information. These words are 
“danger, warning, attention”.

DANGER - if you don’t operate follow those 
indicated in the manual, serious injures, even 
death will be caused.

WARNING - if you don’t operate follow those 
indicated in the manual, device damage and 
injures will be caused.

ATTENTION - if you don’t operate follow those 
indicated in the manual, device damage and 
injures may be caused.

Damage prevention

You can see other important information 
marked with “ATTENTION”.
ATTENTION: If you don’t operate as those 
indicated in the manual, device damage will 
be caused.

 

Safety prevention

If mini chain saw is operated follow those 
indicated in the manual, it will work safely and 
reliably. Before operating the mini chain saw, 
please read this manual carefully. Otherwise, 
injures and device damage will be caused. 

Summary of Contents for DCS4200





















































Reviews: