FREE DUCk - OPERATING AND MAINTENANCE
page 1/36
4.4.2. Malfunction signalling
If one of the traction drives malfunction, a message on the display indicates the type of
fault.
error messages which can be displayed:
N.
DESCRIPTION
RESOLUTION
1
accel. pressed at start-up
Make sure that the pedal was not accidentally pressed.
switch off and restart with key.
2
accel. power too high
Contact authorised Technical assistance
3
Battery power too low
Contact authorised Technical assistance
4
Overcurrent
Contact authorised Technical assistance
5
Hall probe error
Contact authorised Technical assistance
6
Inverter disabled
Contact authorised Technical assistance
7
Battery power too high
Contact authorised Technical assistance
8
Temp. inverter over 85 degrees
switch off vehicle and wait a few minutes. If this message
reappears contact authorised Technical assistance.
9
Temp. inverter over 110 degrees
switch off vehicle and wait a few minutes. If this message
reappears contact authorised Technical assistance.
10
Battery power too low
Contact authorised Technical assistance