10
4.
Battery charging
CAUTION
Prior to using the item for the first time, charge to 100%. Ensure the item, charger, and charging port are dry. The activity
must only be performed by an adult.
Instructions:
- Switch off the item
Model
Reference picture
Instructions
E-Moto Kids
1. Before recharging the vehicle, make sure it
is turned off.
2. Open the rubber plug located on the
charging port (inside side of the frame).
3. First insert the plug (A) of the charger
into the mains socket, then connect the
connector (B) to the vehicle's charging port.
4. When the battery is charged (green light),
pull out the charger connector, remember
to reinsert the rubber plug into the charging
port.
CAUTION
The red light on the charger will turn green when
charging is complete
To recharge the item, use ONLY the battery charger supplied
CAUTION
Model
Battery charger model
Output voltage
Charging time
E-Moto Kids
CP2920
29.4V – 2A
2-3 hours
Using another type of charger may damage the scooter or entail other potential risks. Never leave the item unsupervised
while it is charging. Do not switch the product on while it is charging.
After each use, fully recharge the battery to extend its useful life. Do not recharge the item immediately after use. Allow the
scooter to cool for an hour before recharging.
The item should not be charging for extended periods. Overcharging reduces battery life and poses additional potential
hazards.
Allow the vehicle to discharge completely to prevent damage to the battery.
Charging port
Network adapter
100-240V
Charging connector
Charge status
indicator
