Dualtools PS7000 Owner'S Manual Download Page 11 | Manualshive

Page: 11 / 22

background image

10

UNPACKING

• Carefully remove the tool and accessories from the box. Make sure that all the

items listed in the packing list are included.

• Inspect the tool carefully to make sure no damage occurred during shipping.
• Do not discard packaging material until you have carefully inspected and

satisfactorily operated the tool.

• If any parts are damaged or missing please call 1‑888‑760‑4405 for assistance.

PACKING LIST

• DUALTOOLS® PS7000 Polisher/Sander
• 2‑Position Auxiliary Handle
• Sandpaper (80 grit)
• Soft‑Sided Tool Bag
• Owner’s Manual

ASSEMBLY

WARNING!

The operation of any power tool can result in foreign objects flying into
your eyes. Always wear safety goggles, safety glasses with side shields,
or a full face mask, as appropriate.

WARNING!

• If any parts are missing or damaged, do not operate the PS7000 until

missing parts are replaced. Failure to do so could result in serious
personal injury.

• Do not attempt to modify the PS7000 or create accessories not

recommended for use with it. Any such alteration or modification is
misuse and could result in a hazardous condition and could result in
serious personal injury.

• To prevent accidental starting that could cause serious personal injury,

never have the polisher/sander plugged in when assembling parts.

«
...
9
10
11
12
13
...
»

Summary of Contents for PS7000























Reviews:

No comments

Related manuals for PS7000

Brand: Baileigh Industrial Pages: 28

Brand: Ryobi Pages: 120

Brand: Stanford Pages: 32

Power Tools CP4005

Brand: Sealey Pages: 3

Brand: Pattfield Ergo Tools Pages: 74

Brand: Delta Pages: 12

Brand: Scheppach Pages: 96

Brand: Sparky Group Pages: 154

Brand: Powermatic Pages: 32

Brand: Sioux Tools Pages: 4

Brand: Sioux Tools Pages: 4

Brand: Sioux Tools Pages: 16

Brand: Vector Pages: 4

Brand: Gison Pages: 13

Brand: Far Tools Pages: 33

Brand: Fast Mover Pages: 8

Brand: Oliver Pages: 52

Brand: Jet Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands